Class 0
To protect workers in areas where electrical stunning equipment is used, such as abattoirs, boots with electrical protection to EN 50321-1:2018 Class 0 are required. Dielectric class 0 safety boots are suitable for areas with a maximum working voltage of 1kV.
| Class Rating | Maximum Working Voltage | Withstand Test Voltage | Leakage Current Test Voltage | Maximum Leakage Current |
|---|---|---|---|---|
| Class 0 | 1kV | 10kV | 5kV | 5mA (8mA) |
Workmaster Foodmax LV Dielectric Boots
Designed for abattoir use the Foodmax LV combines all the features of the standard Foodmax boot with electrical protection to EN 50321 to protect workers in areas where electrical stunning equipment is used.
Features
- White or blue chemically resistant compound shaft
- Superb low temperature flexibility down to -40°c
- Cold Insulation to EN ISO 20345
- Cut resistant shaft to EN388 Class 4 (required 2.5)
- Greater cut resistance than conventional soles
- Slip resistance performance twice that required by SATRA TM144 standards
- Vulcanised rubber soles for maximum grip - 30% better than a conventional safety boot sole
- Two or three times the wear resistance of conventional soles
- Excellent resistance to oil and animal fats
- Fuel and oil resistant
- Suitable for live working at up to 1kV with every boot tested to 5kV
Workmaster Dielectric N Boots
An electrically insulating dielectric boot with an integral steel toe cap and Nitrile/PVC sole. The Workmaster Dielectric N boot provides protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.
Features
- 200 Joule epoxy coated steel toe cap to EN ISO 20345
- Seamless construction
- REACH Compliant
- Slip resistance to EN 13287 SRA and SATRA TM144
- Cleated outsole for maximum grip
- Fuel and oil resistant
- Energy absorbing tunnel system conforms to EN 20345 E